YASHIKA GROUT GP 50
YASHIKA GROUT GP 50
YASHIKA GROUT GP 50 is a ready-mixed,non-shrink, non- metallic, flowable, high-strength structural grout. YASHIKA GROUT GP 50 remains stable without failure from compressive loading, impact, lateral thrusts, high heat or continuous vibration. Plastic settlement and shrinkage are prevented by the shrinkage compensated mix design. Low mixing water demand results in the hardened grout giving good freeze-thaw stability, low water absorption plus resistance to oil, sea water and mild alkali attack. The grout is chloride free, can be safely used in contact with steel and can be placed in section thicknesses of 10mm up to 100 mm.
YASHIKA GROUT GP 50 is used where non-shrink, high strength, structural, durable grout is required such as: precise machine bases, pump and equipment bases, structural columns, machine tools,compressors, and anchor bolts.
Prepacked, in factory ensures consistency in supply requires addition of water to develop a free flow, non shrinking and high strength gaining grout.
Material shrinkage is offset by expansion during green condition and later on by maintain original volume.
Self-levelling by nature.
Easy placement and filling of under base of
machinery.
Contains no chlorides, or corrosive ingredients.
Similar appearance to concrete.
Compressive Strength
(BS 1881: Part 116,1983 &
ASTM C 1107) @ w/p
ratio 0.19 (flowable)
Note : Cubes cast were kept
under resistant before testing
to simulate site condition.
Size of the cubes used
70.6mm x 70.6mm x 70.6mm
tested at 300C.
YASHIKA GROUT GP 50 grout is supplied
in 25 kg single lined HDPE bags.
yield 13.7 litres at flowable consistency.