Basements: as part of a waterproofing system.
Floors: above and below screeds to provide a damp proof membrane.
Walls: can be used under a render as a waterproof layer.
Walls: can be used to cover up damp stains on painted areas.
Crack bridging: Unmatched crack bridging ability due to elastomeric properties.
Adhesion: Strong adhesion to masonry substrates
Bunds, silage and sewage tanks: protects concrete from silage attack.
Anti carbonation: Reduces carbon dioxide and chloride ion diffusion thus
protecting re-bars against corrosion. On the basis that the carbon dioxide
permeability of a coating is ten times less than its water vapors
permeability, 0.6mm thick dry film of the membrane will have a carbon
meters of still air. (Recommendation for anti CO2 coatings at least 50m)

For the membrane to give
maximum water/vapor
protection the thickness
of the dried material should
be 0.6mm. To achieve this,
apply two coats each at
a coverage rate
of 0.5 liters /m². The
required quantity of material
may vary depending on the
substrate texture and
absorption.

1 Kg, 5 kg & 20 kg Plastic Buckets.